Skil Care Ultra Cushions Wedge Level Thin Line
Skil Care Ultra Cushions Wedge Level Thin Line
In Stock – Ready to Ship
Single / Case Pack
HCPCS / Material Standards
EnhDme-Pro Wholesale B2B
Executive Product Overview
Skil-Care Ultra-Cushion Series — Wedge, Level, and Thin-Line Seating Cushions
One Cushion Series, Three Profiles, Built Around How the Person Sits
The Skil-Care Ultra-Cushion series delivers enhanced postural support, positioning assistance, and seating comfort across three distinct profiles. Wedge cushions use a front-to-back height differential to promote anterior tilt and upright posture in the chair. Level cushions provide flat, even support for general seating. Thin-Line cushions bring low-profile positioning assistance where seat height matters — keeping feet flat on the floor or footrests.
Each configuration pairs a core with a cover to match the job. Solid foam cores give consistent, supportive structure; gel-foam cores add a fluid comfort layer that helps distribute seated weight across the surface. Vinyl covers offer high fluid resistance and wipe-clean maintenance for demanding environments, while LSII covers use a low-shear surface that reduces friction between the person and the cushion during movement and repositioning. Widths of 16", 18", and 20" (all 16" deep) fit standard wheelchair and chair seats.
Choose Your Configuration
Wedge Profile — Anterior Tilt Support
- 3.5" → 1.5" Wedge: 18" x 16" Solid/Vinyl · 20" x 16" Solid/Vinyl · 18" x 16" Solid/LSII · 20" x 16" Solid/LSII
- 4" → 1.5" Wedge: 16" x 16" Gel-Foam/LSII · 18" x 16" Gel-Foam/LSII · 20" x 16" Gel-Foam/LSII
- 4.5" → 1.5" Wedge: 18" x 16" Solid/Vinyl · 20" x 16" Solid/Vinyl · 18" x 16" Solid/LSII · 20" x 16" Solid/LSII
- 5" → 1.5" Wedge: 18" x 16" Gel-Foam/LSII · 20" x 16" Gel-Foam/LSII
Level Profile — Flat Seating Support
- 3.5" Height: 16" x 16" Solid/Vinyl · 18" x 16" Solid/Vinyl · 20" x 16" Solid/Vinyl · 16" x 16" Solid/LSII · 18" x 16" Solid/LSII
- 4" Height: 16" x 16" Gel-Foam/LSII · 18" x 16" Gel-Foam/LSII · 20" x 16" Gel-Foam/LSII
Thin-Line Profile — Low-Profile Support
- 2.5" Height: 16" x 16" Gel-Foam/LSII · 18" x 16" Gel-Foam/LSII
Select the full configuration (profile, height, width, core, and cover) from the dropdown. All cushions are 16" deep.
Key Features
- Wedge Cushions: A front-high height differential promotes anterior tilt and upright posture in the seat.
- Level Cushions: Flat, even support for general seating needs across three widths.
- Thin-Line Cushions: A 2.5" low-profile option that adds comfort without significantly raising seat height.
- Gel-Foam Options: A gel layer over foam enhances comfort and helps distribute seated weight across the surface.
- LSII Covers: Low-shear cover material reduces shear and friction at the seating surface during movement and repositioning.
- Vinyl Covers: High fluid resistance and fast wipe-clean maintenance for demanding environments.
Equipment Specialist Insight: Choose in this order — profile, then width, then core and cover. Profile is the functional decision: wedge if the person tends to slide forward in the seat, level for general comfort, thin-line when adding height would leave feet dangling. Width should match the seat pan (16", 18", or 20" — measure the chair, not the person). Then let the environment pick the cover: vinyl where spills and frequent cleaning rule, LSII where the person repositions often and surface friction is the complaint. Gel-foam is the comfort upgrade for anyone in the seat most of the day.
Technical Specifications
- BrandSkil-Care
- SeriesUltra-Cushion
- ProfilesWedge (anterior tilt), Level (flat), Thin-Line (low-profile)
- Widths16", 18", 20" (all 16" deep)
- Wedge Heights3.5", 4", 4.5", or 5" front tapering to 1.5" rear
- Level / Thin-Line Heights3.5" or 4" / 2.5"
- Core OptionsSolid foam or gel-foam
- Cover OptionsVinyl (fluid-resistant, wipe-clean) or LSII (low-shear)
- Use SettingsWheelchairs and chairs; home and facility environments
Q: What does a wedge cushion actually do?
A: The front of the cushion sits higher than the rear, gently tilting the pelvis back into the seat (anterior tilt support). This helps the person maintain an upright position and counteracts the tendency to slide forward out of the chair over the course of the day.
Q: How do I pick the right size?
A: Measure the seat pan of the wheelchair or chair, not the person. Choose the width that matches the seat (16", 18", or 20"); all Ultra-Cushions are 16" deep. For wedges, taller front heights produce a stronger tilt — if unsure, start moderate.
Q: Vinyl or LSII cover — which should I choose?
A: Vinyl is the practical pick where spills, moisture, and frequent disinfecting are the routine — it wipes clean in seconds. LSII is a low-shear fabric that reduces friction at the seating surface, the better choice when the person shifts and repositions frequently and cover drag is a comfort issue.
Product specifications are provided by the manufacturer and are subject to change. This product is a seating comfort and positioning aid; it is not a substitute for professional medical advice or a clinical seating assessment. Consult a healthcare professional or seating specialist for guidance specific to your situation.
⚠ California Proposition 65 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Facility Procurement & Risk Mitigation Insight
Standardizing on the Skil Care Ultra Cushions Wedge Level Thin Line equips clinical facilities with dependable assets engineered to streamline care workflows, lower maintenance overhead, and uphold strict safety standards.
Procurement & Compliance FAQs
Does EnhDme-Pro accept institutional Purchase Orders (POs) and tax-exempt accounts?
Yes. EnhDme-Pro works directly with healthcare facilities, government entities, and corporate procurement departments. Tax-exempt documentation and terms accounts can be established prior to ordering.
Does EnhDme-Pro bill insurance or Medicare directly?
No. EnhDme-Pro operates strictly as a direct-pay wholesale B2B distributor and does not submit claims to Medicare, Medicaid, or private commercial insurance plans.
B2B Procurement Disclaimer: EnhDme-Pro operates strictly as a direct-sale wholesale distributor. Technical specifications and manufacturer data are compiled for facility asset verification prior to purchase.
⚠ WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.