Nidek Nuvo 10 High-Flow Stationary Oxygen Concentrator (Model 595)
A closer look at the Nuvo 10’s high-flow, high-pressure design — built for patients and facilities whose oxygen needs exceed a standard home concentrator, with dual-outlet delivery and continuous flow up to 10 LPM.
For patients whose prescribed oxygen needs exceed what a standard 5-liter home concentrator can deliver, finding the right high-flow equipment matters — both for clinical adequacy and day-to-day reliability. The Nidek Nuvo 10 (Model 595) is built specifically for this higher-acuity range.
Delivering continuous-flow oxygen from 2.0 to 10.0 LPM at an elevated 20 PSIG outlet pressure, the Nuvo 10 is engineered for high-acuity respiratory care, long-term care facilities, and home health networks managing patients with more demanding oxygen prescriptions.
Engineered by Nidek Medical Products, Inc.
The Nuvo 10 is manufactured in the United States by Nidek Medical Products, Inc. and is backed by a 3-year limited manufacturer warranty. As a Class II FDA-regulated medical device, it is available strictly by prescription.
Nidek Nuvo 10 (Model 595)
Nidek Nuvo 10 High-Flow Stationary Oxygen Concentrator
A heavy-duty stationary concentrator built for high-acuity respiratory needs. Delivers continuous-flow oxygen from 2.0 to 10.0 LPM at 90% purity, with a dual-outlet manifold enabling split-flow delivery to two patients or beds concurrently. The 20 PSIG outlet pressure directly powers large-volume jet nebulizers and venti-masks without a separate air compressor, and maintains flow through tubing runs up to 200 feet. Includes an integrated OCSI oxygen monitor with flow-blockage alarm and a lockable flowmeter dial.
Complete Spec Sheet
| Specification | Detail |
|---|---|
| Brand / Manufacturer | Nidek Medical Products, Inc. |
| Model | Nuvo 10 (Model 595) |
| Classification | High-Flow / High-Pressure Stationary Oxygen Concentrator |
| FDA Status | Class II Medical Device — Prescription (Rx) Required |
| HCPCS Code | E1390 (Single Port) / E1391 (Dual Delivery Port) |
| Flow Range | 2.0–10.0 LPM Continuous Flow |
| Outlet Pressure | 20 PSIG (138 kPa) |
| Oxygen Concentration | 90% (+5.0% / -3.0%) at all flow rates |
| Purity Monitor | Integrated OCSI with flow-blockage alarm |
| Power | 115 VAC / 60 Hz (~700W average draw) |
| Sound Level | < 58 dBA average |
| Dimensions | 28.0"H x 16.0"W x 16.0"D |
| Weight | ~54.0 lbs (24.5 kg) |
| Origin / Warranty | Made in USA — 3-Year Limited Manufacturer Warranty |
Clinical Selection Note: Equipment must be selected according to prescribed flow rate and delivery requirements. Always cross-reference device capabilities with your physician’s prescription.
Who Is the Nuvo 10 Typically Prescribed For?
Because the Nuvo 10 is built for higher continuous-flow needs and dual-patient delivery, it’s most often found in long-term care and skilled nursing facilities standardizing on a high-pressure unit, home health networks managing higher-acuity respiratory patients, and shared-room or two-bed home setups where the dual-outlet design allows one unit to serve two people at once. Flow needs vary significantly from person to person — if you’re unsure whether a high-flow unit applies to your situation, that’s a conversation for your physician or respiratory therapist.
Adding the Nuvo 10 to the EnhDme-Pro catalog reflects our focus on supplying medical-grade oxygen equipment engineered for durability and clinical accuracy at the higher end of the flow range.
Frequently Asked Questions
What clinical advantage does the 20 PSIG output pressure provide?
Unlike standard 5-liter concentrators (roughly 5–7 PSIG), the Nuvo 10’s 20 PSIG output provides enough pneumatic pressure to directly drive large-volume jet nebulizers, venti-masks, and tracheostomy setups, and to maintain flow through tubing runs up to 200 feet.
Can the Nuvo 10 deliver oxygen to two people at the same time?
Yes. Its dual-outlet manifold allows flow to be split between two delivery ports, serving two patients or beds concurrently, up to a combined maximum of 10 LPM.
Is the Nuvo 10 loud?
It operates at under 58 dBA on average — comparable to a quiet conversation — despite its higher output capacity.
Kevin Lambing, CDME
Kevin Lambing, CDME is the CEO and founder of EnhDme-Pro (enhdme-pro.com). As a Certified Durable Medical Equipment Specialist with over two decades of experience in clinical respiratory distribution, Kevin leads EnhDme-Pro in providing high-grade medical equipment and technical education to healthcare providers and clinical institutions nationwide.